Dissmann High Voltage Ceramic Fuse 10 X 38 Solar PV Fuse
Dissmann High Voltage Ceramic Fuse 10 X 38 Solar PV Fuse
Basic information of the 750VDC Charging Pile Module Fuse：
- Rated voltage：750VDC
- Rated current：10-50A
- Protection type：aR
- Breaking capacity： 33KA （10-20A）；6KA（25-50A）
- Meet the requirements：UL248/GB13593/IEC60268/GB31465
- UL Certification：JDYX2.E343461 / JDYX8.E343461
Product type HD10V.J03 750VDC：
| HD10V.J03 750VDC | |||
| Product code | Rated Current A |
I²t | power consumption |
| （A²Sec） | W | ||
| HD10V.J03 | 10 | 80 | 1.8 |
| HD10V.J03 | 15 | 150 | 2.6 |
| HD10V.J03 | 16 | 200 | 2.8 |
| HD10V.J03 | 20 | 330 | 3.5 |
| HD10V.J03 | 25 | 480 | 4.3 |
| HD10V.J03 | 30 | 730 | 5.6 |
| HD10V.J03 | 32 | 780 | 6.0 |
| HD10V.J03 | 35 | 900 | 6.6 |
| HD10V.J03 | 40 | 1400 | 7.6 |
| HD10V.J03 | 50 | 2200 | 9.6 |
Basic information of the 1000VDC Charging Pile Module Fuse：
Rated voltage：1000VDC
Rated current：10-40A
Protection type：aR
Breaking capacity： 1.5KA （10-40A）
Meet the requirements：UL248/GB13593/IEC60268/GB31465
UL Certification：JDYX2.E343461 / JDYX8.E343461
Product type HD10PV.J03 1000VDC：
| HD10PV.J03 1000VDC | |||
| Product code | Rated Current A |
I²t | power consumption |
| （A²Sec） | W | ||
| HD10PV.J03 | 10 | 80 | 1.8 |
| HD10PV.J03 | 15 | 150 | 2.6 |
| HD10PV.J03 | 16 | 200 | 2.8 |
| HD10PV.J03 | 20 | 330 | 3.5 |
| HD10PV.J03 | 25 | 480 | 4.3 |
| HD10PV.J03 | 30 | 730 | 5.6 |
| HD10PV.J03 | 32 | 780 | 6.0 |
| HD10PV.J03 | 35 | 900 | 6.6 |
| HD10PV.J03 | 40 | 1400 | 7.6 |
Overall dimensions of the product（mm）
Normal use conditions and parameter correction：
The fuse operates under the following normal conditions of use, without additional correction.
When the normal use conditions are exceeded, if they are within the allowable use conditions, some parameters may need to be corrected or consulted. If the scope of allowable use conditions is exceeded, our company should be consulted and the work adaptability evaluation and test of the conditions should be carried out.
It is recommended that the current value of long-term current flow should not be greater than 80% of the rated current.
Please refer to the temperature evaluation curve for the use of overtemperature.
Ambient air temperature
Normal use conditions: - 5 ° C~40 ° C.
Allowable use conditions: - 40 ° C~85 ° C.
During packaging and transportation, rain and snow and mechanical damage shall be avoided.
Storage temperature
Product storage temperature:
-40°C~105°C。
The relative humidity is not more than 70% at 40 ° C;
The relative humidity at 30 ° C is not more than 80%;
Under 20 ° C, the relative humidity is not more than 90%.
Packaging storage temperature:
-40°C~70°C。
The relative humidity is not more than 40% at 40 ° C;
The relative humidity is not more than 50% at 30 ° C;
Under 20 ° C, the relative humidity is not more than 90%, and there is no condensation.
More fuses can be used for Charging pile：
Δημοφιλείς Ετικέτες: dissmann high voltage ceramic fuse 10 x 38 solar pv fuse, China, manufacturers, suppliers, factory
Αποστολή ερώτησής
